Changing Final Drive Oil

Changing Final Drive Oil

COMPONENTS:

NOTE: Rear final drive shown, front final drive similar.

DRAINING
1. Stop the engine.
2. Remove the drain plug and drain the gear oil.
3. Apply sealant to the drain plug. Install the drain plug on the final drive assembly and tighten to specification.
^ Use Genuine Silicone RTV or equivalent.
Filler plug: Refer to "COMPONENTS", (FFD).
Refer to "Removal and Installation" (RFD without ELD). Removal and Installation
Refer to "Removal and Installation" (RFD with ELD). Removal and Installation

FILLING





1. Remove the filler plug. Fill with new specified gear oil until the gear oil level reaches the specified limit near the filler plug mounting hole as shown.
Oil grade and capacity: Refer to MA-11, "Fluids and Lubricants". Fluids
2. After refilling the gear oil, check the gear oil level as shown. Apply sealant to the filler plug. Install the filler plug on the final drive assembly and tighten to specification.
^ Use Genuine Silicone RTV or equivalent.
Filler plug: Refer to "COMPONENTS" (FFD).
Refer to "Removal and Installation" (RFD without ELD). Removal and Installation
Refer to "Removal and Installation" (RFD with ELD). Removal and Installation