Checking Final Drive Oil

Checking Final Drive Oil

COMPONENTS:

NOTE: Rear final drive shown, front final drive similar.

OIL LEAKAGE AND OIL LEVEL
1. Check that gear oil is not leaking from the final drive assembly or around it.





2. Check the gear oil level from filler plug mounting hole as shown.

CAUTION: Do not start engine while checking oil level.

3. Apply sealant to the filler plug. Install the filler plug on the final drive assembly and tighten to specification.
^ Use Genuine Silicone RTV or equivalent.
Oil grade and viscosity. Refer to MA-11, "Fluids and Lubricants". Fluids
Filler plug: Refer to "COMPONENTS" (FFD).
Refer to "Removal and Installation" (RFD without ELD). Removal and Installation
Refer to "Removal and Installation" (RFD with ELD). Removal and Installation