Memory Positioning Systems: Description and Operation

AUTOMATIC DRIVE POSITIONER

Manual Operation
The driving position [front seat LH position, pedal position (accelerator, brake) and door mirror position can be adjusted with the power seat switch LH, pedal adjusting switch or door mirror remote control switch.

NOTE:
- The door mirrors can be manually operated with the ignition switch turned ACC or ON.
- Adjusting pedal operates only when A/T selector lever is in P position (except when ignition switch turned to OFF).
- If A/T device (park position switch) error is detected, manual adjustable pedal operation cannot be performed when ignition switch turns ON.




Automatic Operation

NOTE:
- Disconnecting the battery erases the stored memory.
- After connecting the battery, insert the key into the ignition cylinder and turn the front door switch LH ON (open) -> OFF (close) -> ON (open), the Entry/Exiting function becomes possible.




- After Exiting operation is carried out, return operation can be operated.

NOTE: During automatic operation, if the ignition switch is turned ON -> START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.

System Description
- The system automatically moves the front seat LH to facilitate entry/exit to/from the vehicle. The driver seat control unit can also store the optimum driving positions (front seat LH, pedal position and door mirror position) for 2 people. If the front seat is changed, one-touch operation allows changing to the other driving position.
- The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed as desired, using the display unit in the center of the instrument panel. The set content is transmitted by CAN communication, from display unit (without NAVI) or display control unit (with NAVI) to driver seat control unit.
- Using CONSULT-II, the seat slide amount at entry/exit setting can be changed.




FAIL- SAFE MODE
When any manual and automatic operations are not performed, if any motor operations of seats or pedals are detected for T2 or more, status is judged "Output error".

CANCEL OF FAIL-SAFE MODE
The mode is cancelled when the A/T selector lever is shifted to P position from any other position.




MEMORY STORING AND KEYFOB INTERLOCK STORING
- Store the 2 driving positions and shifts to the stored driving position with the memory switch.
- Keyfob interlock function is set simultaneously with setting driving position memory. It can set driving position to memory position.

NOTE:
- If another keyfob interlock function setting is performed by same key, the newly registered setting is valid.
- If a new memory string is performed to memory switch that already set keyfob interlock function, keyfob interlock function setting is maintained.
- If the keyfob has not been previously programmed to the vehicle, keyfob interlock function cannot set.

MEMORY OPERATION

Selecting the memorized position.
1. Within 45 seconds of opening front door LH press the desired seat memory switch for at least 1 second, or turn ignition switch ON and press the desired seat memory switch for at least 1 second.




2. The front seat LH, door mirrors, accelerator pedal and brake pedal will move to their set memory positions. During adjustments, indicator LED flashes, then illuminates for 5 seconds.

NOTE: The front seat LH position and pedal adjustment functions (see the following table) operate simultaneously in the order of priority.




ENTRY OPERATION
When the front seat LH is in the exiting position, the following operation moves the seat to the previous position before the exiting operation.




EXITING OPERATION
At Entry/Exiting, the front seat LH is automatically moved to the exiting position.




KEYFOB INTERLOCK OPERATION
- The system performs memory operation, exiting operation and return operation by pressing keyfob unlock button.

NOTE:
- If Entry/Exiting operation is cancelled, the system performs memory operation only.
- If ignition switch turns ON in the middle of memory operation, the system does not perform exiting operation after memory operation.
- If ignition switch turns ON in the middle of exiting operation, entry operation starts at that time.

CAN Communication System Description
Refer to LAN-25, "Information Bus". CAN Communication