Connecting Rod, Engine

CONNECTING ROD SIDE CLEARANCE





^ Measure side clearance between the connecting rod and crankshaft arm using suitable tool.
Standard: 0.20 - 0.40 mm (0.0079 - 0.0157 inch)
Limit: 0.40 mm (0.0157 inch)
^ If measured value exceeds the repair limit, replace the connecting rod bearings, and measure again. If it still exceeds the repair limit, replace the crankshaft also.

CONNECTING ROD BEND AND TORSION





^ Check connecting rod alignment using suitable tool.
Limit:
Bend: 0.15 mm (0.0059 inch) per 100 mm (3.94 inch) length
Torsion: 0.30 mm (0.0118 inch) per 100 mm (3.94 inch) length





^ If measurement exceeds the limit, replace connecting rod assembly.

CONNECTING ROD:

CONNECTING ROD