Data Monitor

DATA MONITOR

Operation Procedure
1. Touch "DATA MONITOR" on the "SELECT DIAG MODE" screen.




2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
3. When "SELECTION FROM MENU" is selected, touch items to be monitored then touch "START". When "ALL SIGNALS" or "MAIN SIGNALS" is selected, all the displayed items will be monitored.
4. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".




All Signals, Main Signals, Selection From Menu

NOTE: Perform monitoring of IPDM E/R data with the ignition switch ON. When the ignition switch is at ACC, the display may not be correct.