Doors, Hood and Trunk: Adjustments

DOOR




Fitting Adjustment

FRONT DOOR
Longitudinal Clearance and Surface Height Adjustment at Front End
1. Remove the fender.
2. Loosen the hinge bolts. Raise or lower the front door at rear end to adjust.
3. Install the fender.

REAR DOOR
Longitudinal clearance and surface height adjustment at front end
1. Remove the center pillar upper finisher.
2. Loosen the lower hinge bolts.
3. From inside the vehicle, loosen the upper hinge nuts. Open the door, and raise or lower the rear end of the door to adjust.
4. Install the center pillar lower finisher.