Without Scan Tool

HOW TO INITIATE COMBINATION METER SELF-DIAGNOSIS MODE

NOTE: Once entered, Combination Meter Self-Diagnosis Mode will function with the ignition switch in ON or START. Combination Meter Self-Diagnosis Mode will exit upon turning the ignition switch to OFF or ACC.

To initiate Combination Meter Self-Diagnosis Mode, refer to the following procedure.
1. Turn the ignition switch ON, while pressing the odometer/trip meter switch for 5 - 8 seconds.

NOTE: If the diagnosis function is activated the odometer/trip meter will display test.

Combination Meter Self-Diagnosis Mode Functions Part 1:

Combination Meter Self-Diagnosis Mode Functions Part 2:

Combination Meter Self-Diagnosis Mode Functions Part 3:

Combination Meter Self-Diagnosis Mode Functions Part 4:

COMBINATION METER SELF-DIAGNOSIS MODE FUNCTIONS