System Specifications

Timing Cover





Tighten bolts to the specified torque in numerical order as shown.
There are four type of bolts. Refer to the following for locating bolts.
Bolt position Bolt diameter
1 - 5 10 mm (0.39 inch)
6 - 25 6 mm (0.24 inch)
Bolt position Tightening specification
1 - 5 55.0 Nm (5.6 kg-m, 41 ft. lbs.)
6 - 25 12.7 Nm (1.3 kg-m, 9 ft. lbs.)
After all bolts tightened, retighten them to the specified torque in numerical order as shown.

Crankshaft Pulley
Tighten crankshaft pulley bolt in two steps.
Step 1 44.1 Nm (4.5 kg-m, 33 ft. lbs.)
Step 2 84° - 90° degrees clockwise

Image Symbols:

Timing Chain Tensioner