Self-Diag Results Mode

SELF-DIAG RESULTS MODE

Operation Procedure
1. Perform "CONSULT-II SETTING PROCEDURE". Refer to RFD-88, "CONSULT-II SETTING PROCEDURE". CONSULT-II Setting Procedure





2. With engine at idle, touch "SELF-DIAG RESULTS". Display shows malfunction experienced since the last erasing operation.

NOTE:
^ The details for "TIME" are as follow:
- "0": Error currently detected with differential lock control unit.
- Except for "0": Error detected in the past and memorized with differential lock control unit.
Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").

Display Item List: