Work Flow
Work Flow1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Perform the preliminary check. Refer to SE-30, "Preliminary Check". Preliminary Check
4. Check the self-diagnosis, results using CONSULT-II. Refer to SE-31, "CONSULT-II Function (AUTO DRIVE POS.)". CONSULT-II Function (Auto Drive POS.)
5. Repair or replace depending on the self-diagnostic results.
6. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to SE-34, "Symptom Chart". Symptom Related Diagnostic Procedures
7. Does the automatic drive positioner system operate normally?
If Yes, GO TO 8.
If No, GO TO 3.
8. Inspection End.