Preliminary Check

Preliminary Check

BASIC INSPECTION

1. CHECK BCM CONFIGURATION
Confirm BCM configuration for "DISPLAY STYLE" is set to "MODE2". Refer to BCS-20, "READ CONFIGURATION PROCEDURE". Testing and Inspection
OK or NG
OK >> GO TO 2.
NG >> Change BCM configuration for "DISPLAY STYLE" to "MODE2". Refer to BCS-22, "WRITE CONFIGURATION PROCEDURE". Testing and Inspection

2. CHECK ALL TIRE PRESSURES
Check all tire pressures.
OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.

3. CHECK LOW TIRE PRESSURE WARNING LAMP ACTIVATION
Check low tire pressure warning lamp activation.
Does warning lamp activate for 1 second when ignition switch is turned ON?
YES >> GO TO 3.
NO >> GO TO WT-24, "Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is Turned On". Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is Turned On

4. CHECK BCM CONNECTOR
1. Disconnect BCM harness connector.
2. Check terminals for damage or loose connection.
3. Reconnect harness connector.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

5. CHECK TRANSMITTER ACTIVATION TOOL
Check transmitter activation tool battery.
OK or NG
OK >> Carry out self-diagnosis.
NG >> Replace battery in transmitter activation tool.