Camshaft, Engine

Camshaft Bearing





Tighten the camshaft bracket bolts as follows:
Camshaft bracket bolts
Step 1 (bolts 9 - 12) 2.0 Nm (0.2 kg-m, 17 inch lbs.)
Step 2 (bolts 1 - 8) 2.0 Nm (0.2 kg-m, 17 inch lbs.)
Step 3 (all bolts) 5.9 Nm (0.6 kg-m, 52 inch lbs.)
Step 4 (all bolts) 10.4 Nm (1.1 kg-m, 92 inch lbs.)

CAUTION: After tightening the camshaft bracket bolts, be sure to wipe off excessive liquid gasket from the parts listed below.
Mating surface of rocker cover
Mating surface of front cover





CAMSHAFT AND CAMSHAFT BEARING