Timing Cover

Timing Cover
Install the front cover as follows:





Install the bolts in the numerical order shown.
M6 x 50 mm (1.97 inch): No. 1, 20, 25, 26, 27
M6 x 80 mm (3.15 inch): No. 4, 5, 7
M6 x 20 mm (0.79 inch): Except the above
After tightening, re-tighten to the specified torque.





Install the timing chain case cover RH bank (A) and timing chain case cover LH bank (B) as follows:
*: Cross mark (c) that can not be seen after assembly
D 2.6 - 3.6 mm (0.102 - 0.142 inch) dia.





Install the bolts in the numerical order shown.