Checking Steering Wheel Turning Force

CHECKING STEERING WHEEL TURNING FORCE
1. Park vehicle on a level, dry surface and set parking brake.
2. Start engine.
3. Bring power steering fluid up to an operating temperature of approximately 60° - 80°C (140° - 176°F). Make sure the tires are inflated to specified pressure.





4. Check steering wheel turning force using Tool when steering wheel has been turned 360° from the neutral position.
Tool number: J-44372
Steering wheel turning force: 39 N (4 kg-f, 9 lb-f) or less
5. If steering wheel turning force is out of specification, inspect steering column.
6. If steering column meets specification, repair steering gear.