Air Breather Hose

AIR BREATHER HOSE

Removal and Installation

Exploded View TF-138:

CAUTION:
^ Make sure there are no pinched or restricted areas on each air breather hose caused by bending or winding when installing it.





^ Install each air breather hose into the breather tube (metal connector) until the hose end reaches the end of the curve section. Set each air breather hose with paint mark facing upward.





^ Install actuator/transfer motor air breather hose and transfer air breather hose on clip A and clip B with the paint mark facing upward.





^ Install clip C on actuator/transfer motor air breather hose and transfer air breather hose with the paint mark matched.





^ Install actuator/transfer motor air breather hose and transfer air breather hose on clip D and clip E with the paint mark facing upward.





^ Install the actuator air breather hose into the actuator (case connector) until the hose end reaches the base of the tube. Set actuator air breather hose with paint mark facing leftward.





^ Install clip F on transfer motor air breather hose and transfer air breather hose with the paint mark matched.





^ Install the transfer air breather hose into the breather tube (transfer, metal connector) until the hose end reaches the base of the tube. Set transfer air breather hose with paint mark facing upwards.





^ Install the transfer motor air breather hose into the transfer motor (case connector) until the hose end reaches the end of the curved section. Set transfer motor air breather hose with paint mark facing leftward.