Memory Positioning Systems: Description and Operation

AUTOMATIC DRIVE POSITIONER




System Description
- Refer to Owner's Manual for Automatic Drive Positioner system operating instructions.
- The settings (ON/OFF) of the automatic sliding seat (entry/exiting operation) at entry/exit can be changed as desired, using the display unit in the center of the instrument panel. The set content is transmitted by CAN communication, from display unit (without NAVI) or display control unit (with NAVI) to driver seat control unit.
- Using CONSULT-II, the seat slide amount at entry/exit setting can be changed.




FAIL- SAFE MODE




CANCEL OF FAIL-SAFE MODE

CAN Communication System Description
Refer to "Information Bus".