Diagnostic Procedure 6

Trouble Diagnosis Without CONSULT-II

DIAGNOSTIC PROCEDURE 6

Inspect SRS Malfunction Using "AIR BAG" Warning Lamp-Diagnosis Mode

NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.

1. Turn ignition switch ON.
2. After "AIR BAG" warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two more times (3 times total).
5. Turn ignition switch ON.

SRS is now in Diagnosis mode.
"AIR BAG" warning lamp operates in Diagnosis mode as follows:

Warning Lamp Flash Code Chart (Part 1):

Warning Lamp Flash Code Chart (Part 2):

Warning Lamp Flash Code Chart (Part 3):

Warning Lamp Flash Code Chart (Part 4):

WARNING LAMP FLASH CODE CHART