Tightening Torques & Sequences

Intake Manifold
^ If stud bolts were removed from cylinder head, install them and tighten to the specified torque.
Intake manifold studs 11.0 Nm (1.1 kg-m, 8 ft-lb)





^ Tighten all nuts and bolts to the specified torque in two or more steps in numerical order as shown.
Intake manifold bolt and nuts
1st step 7.4 Nm (0.75 kg-m, 5 ft-lb)
2nd step and after 29.0 Nm (3.0 kg-m, 21 ft-lb)