Rear Door: Service and Repair
Removal and InstallationREAR DOOR
1. Remove the door finisher.
2. Remove the inner seal.
3. Remove the rear door glass and regulator.
4. Remove the door harness.
5. Remove the check link bolt from the hinge pillar.
Check link to hinge pillar bolt 14.7 N.m (1.5 kg-m, 11 ft-lb)
6. Remove the door hinge nuts, and remove the door assembly.
Door hinge nuts 24.5 N.m (2.5 kg-m, 18 ft-lb)
7. Install in the reverse order of removal.