Timing Components: Specifications

Exploded View EM-55 (Part 1):

Exploded View EM-55 (Part 2):

Timing Chain Tensioner

Crankshaft Pulley
Tighten crankshaft pulley bolt in two steps.
Step 1 44.1 Nm (4.5 kg-m, 33 ft-lb)
Step 2 84° - 90° clockwise





Remove Tool.
Tool number: KV10117700 (J-44716)
Rotate crankshaft pulley in normal direction (clockwise when viewed from front) to confirm it turns smoothly.

Timing Cover





Tighten bolts to the specified torque in numerical order as shown.
There are four type of bolts. Refer to the following for locating bolts.
Bolt position
1 - 5 55.0 Nm (5.6 kg-m, 41 ft-lb)
6 - 25 12.7 Nm (1.3 kg-m, 9 ft-lb)
After all bolts tightened, retighten them to the specified torque in numerical order as shown.