Third Seat - W/O Power Folding
THIRD SEATW/O Power Folding
Exploded View
Third seat LH
SE-55 Exploded View (Part 1):
SE-55 Exploded View (Part 2):
Third seat RH
SE-57 Exploded View:
LH Side Seat
REMOVAL
1. Remove the storage bin.
2. Remove the lower base trim covers.
3. Remove front link nuts and the LH hinge front bolt.
Front link nuts : 45 N.m (4.6 Kg-m, 33 ft-lb)
LH hinge front bolt : 45 N.m (4.6 Kg-m, 33 ft-lb)
4. Remove push pin (2) and release elastic band (3) from seat frame (1).
5. Partially lift seatback upright, then remove seat belt buckle (2) from between hinge cover (1) and seat cushion side facing (3).
6. Retract the seat into the cargo floor position.
7. Remove the seat hinge rear bolt (A) and seat belt buckle bolt (B) from the seat assembly.
Seat hinge rear bolt : 45 N.m (4.6 Kg-m, 33 ft-lb)
Seat belt buckle bolt : 50 N.m (5.1 Kg-m, 37 ft-lb)
CAUTION: Discard the seat belt buckle bolt and use a new bolt for installation.
8. Remove the seat assembly.
INSTALLATION
Installation is in the reverse order of removal.
RH Side Seat
REMOVAL
1. Remove the storage bin.
2. Remove the lower base trim covers.
3. Remove front link nuts (A) and RH hinge front bolt (B).
Front link nuts : 45 N.m (4.6 Kg-m, 33 ft-lb)
RH hinge front bolt : 45 N.m (4.6 Kg-m, 33 ft-lb)
4. Remove push pin (2) and release elastic band (3) from seat frame (1).
5. Partially lift seatback upright, then remove seat belt buckle (2) from between hinge cover (1) and seat cushion side facing (3).
6. Retract the seat into the cargo floor position.
7. Remove the rear bolts from the seat assembly.
Seat hinge rear bolt : 45 N.m (4.6 Kg-m, 33 ft-lb)
8. Remove the seat assembly.
INSTALLATION
Installation is in the reverse order of removal.