Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun Truck >> 2008 >> Armada 2WD V8-5.6L (VK56DE) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair

Variable Valve Timing Actuator: Service and Repair

INTAKE VALVE TIMING CONTROL

Intake Valve Control Solenoid Valve (LH)

REMOVAL
1. Remove engine room cover using power tool.
2. Remove air duct and resonator assembly.
3. Remove drive belt.
4. Disconnect Intake valve control solenoid valve connector (LH).




5. Remove Intake valve control solenoid valve (LH) (2) from Intake valve control solenoid valve cover (LH) (1).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Replace the O-ring (3) of the Intake valve control solenoid valve with a new one, then lubricate O-ring with engine oil before installing.

Intake valve control solenoid valve bolt: 9.6 N.m (0.98 kg-m, 85 in-lb)

Intake Valve Control Solenoid Valve (RH)

REMOVAL
1. Remove drive belt.
2. Disconnect Intake valve control solenoid valve connector (RH).




3. Remove Intake valve control solenoid valve (RH) (3) from Intake valve control solenoid valve cover (RH) (1).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Replace the O-ring (2) of the Intake valve control solenoid valve with a new one, then lubricate O-ring with engine oil before installing.

Intake valve control solenoid valve bolt: 9.6 N.m (0.98 kg-m, 85 in-lb)
pro multis · About Operation CHARM