Instrument Cluster / Carrier: Service and Repair

ON-VEHICLE REPAIR

COMBINATION METER

Removal and Installation

REMOVAL
1. Disconnect battery negative terminal.
2. Remove the cluster lid A.




3. Remove the steering column nuts (A), using power tool, then lower steering column to allow for enough clearance to remove combination meter.




4. Remove the combination meter lower screws (A), using power tool.




5. Remove the combination meter upper screws (A) using power tool, and pull out the combination meter (1).
6. Disconnect the combination meter connectors, and remove the combination meter (1).

INSTALLATION
Installation is the reverse order of removal.