Service Procedure

1a. For Pathfinder and Armada: Check for a light green sticker on the back wall of the glove box.





^ If there is a sticker as shown in Figure 1, the software update has already been done.

^ If there is not a sticker, go to step 2.

1b. For Murano; Go to step 2.

2. Start the engine.





3. Write down the radio station presets.





4. Turn the audio system OFF.

5. Load the reprogramming CD into slot 1 of the in-dash CD player.

a. Press load button

b. Press "1" button

C. Insert DISC

IMPORTANT:
The reprogramming CD must be loaded into slot 1. If there is already a CD in slot 1, remove it and install the reprogramming CD.





NOTE:
If you get the message shown in Figure 3 a few seconds after installing the CD the system already contains the updated software.





6. Wait for the reprogramming to complete.

^ After loading the reprogramming CD into slot 1, the process will start automatically.

^ During the process a progress bar will display.

CAUTION:
^ Do not turn the engine OFF during this process.

^ Do not touch the audio system controls during this process.





^ When the process is complete, the message shown in Figure 5 will display.

7. Eject the reprogramming disc from the CD player.

^ Reinstall / Reload any customer CDs that were removed.

8. Reset the radio station presets and make sure the radio works correctly.

9. Set the clock to the correct time as follows:





a. Press SETTING





b. Select Clock





c. Make sure these settings are correct:

^ On-screen Clock = ON

^ Clock Format = 12h

^ Daylight Savings Time

^ Time Zone





d. Select Clock Adjust





e. Set the Time.

f. Select OK





g. Press BACK 3 times to return to the main menu.