Timing Cover

Timing Cover

EM-42 Components (Part 1):

EM-42 Components (Part 2):

Install the front cover as follows:
a. Install a new O-ring on the cylinder block.





b. Apply liquid gasket as shown.
Use Genuine RTV Silicone Sealant or equivalent.
c. Check again that the timing alignment marks on the timing chain and on each sprocket are aligned. Then install the front cover.





d. Install the bolts in the numerical order shown.
M6 x 50 mm (1.97 in): No. 1, 20, 25, 26, 27
M6 x 80 mm (3.15 in): No. 4, 5, 7
M6 x 20 mm (0.79 in): Except the above
e. After tightening, re-tighten to the specified torque.

CAUTION: Be sure to wipe off any excessive liquid gasket leaking onto surface mating with oil pan.