Oil Pump

Oil Pump

TM-263 COMPONENTS:

DISASSEMBLY





1. Remove oil pump housing from oil pump cover.





2. Remove oil pump housing oil seal using suitable tool.

CAUTION: Be careful not to scratch oil pump housing.





3. Remove O-ring from oil pump housing.





4. Remove O-ring from oil pump cover.

ASSEMBLY





1. Install new O-ring to oil pump cover.

CAUTION:
^ Do not reuse O-ring.
^ Apply [1][2]ATF to O-ring.





2. Install new O-ring to oil pump housing.

CAUTION:
^ Do not reuse O-ring.
^ Apply [1][2]ATF to O-ring.





3. Install new oil pump housing oil seal to the oil pump housing until it is flush with the face of oil pump housing using Tool.

CAUTION:
^ Do not reuse oil seal.
^ Apply [1][2]ATF to oil seal.

Tool number: ST33400001 (J-26082)





4. Install oil pump housing in oil pump cover. Tighten oil pump housing bolts to the specified torque. Refer to TM-233, "Component". Component