A/T Check Indicator Lamp Does Not Come On

A/T Check indicator Lamp Does Not Come On

SYMPTOM: AT CHECK indicator lamp does not come on for about 2 seconds when turning ignition switch to "ON".

DIAGNOSTIC PROCEDURE

1. CHECK CAN COMMUNICATION LINE
Perform the self-diagnosis. Refer to TM-33, "CONSULT-III Function (TRANSMISSION)". Scan Tool Testing and Procedures
Is a malfunction in the CAN communication indicated in the results?
YES >> Check CAN communication line. Refer to TM-22, "CAN Communication". CAN Communication
NO >> GO TO 2.

2. CHECK A/T CHECK INDICATOR LAMP CIRCUIT
Check the combination meter. Refer to MWI-5, "METER SYSTEM: System Description". Meter System
OK or NG
OK >> GO TO 3.
NG >> Repair or replace damaged parts.

3. CHECK TCM POWER SUPPLY AND GROUND CIRCUIT
Check TCM power supply and ground circuit. Refer to TM-94, "Diagnosis Procedure". Main Power Supply and Ground Circuit
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.