King Cab

KING CAB

Rear Door

CAUTION:
- When removing and installing the door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply body grease.

1. Remove the door glass.
2. Remove the speaker.
3. Remove the door handles and latch assembly.
4. Remove the check link.
5. Remove the wire harness.




6. Remove the door assembly.

Installation is in the reverse order of removal.
- Align the rear door. Refer to "Fitting Adjustment".

Door hinge nuts : 24.5 N.m (2.5 kg-m, 18 ft-lb)

Check link bolt : 5.1 N.m (0.52 kg-m, 45 in-lb)