Compressor HVAC: Service and Repair

COMPRESSOR

Removal and Installation for Compressor

Exploded View HA-33:

REMOVAL
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure".
2. Remove the front right wheel and tire assembly.
3. Remove the engine under cover and the splash shield using power tool.
4. Remove the engine air cleaner and air ducts.
5. Remove the drive belt.
6. Disconnect the compressor electrical connector.
7. Disconnect the high-pressure flexible hose and low-pressure flexible hose from the compressor.

CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

8. Remove the compressor bolts and nut using power tools.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-ring of the low-pressure flexible hose and high-pressure flexible hose with a new one, apply compressor oil to them when installing them.
- After recharging the A/C system with refrigerant, check for leaks.