Repair Work Flow

WORK FLOW





DETAILED FLOW

1. CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
>> GO TO 2

2. PRELIMINARY CHECK
Perform preliminary check. Refer to WT-5, "Preliminary Check". Preliminary Check
>> GO TO 3

3. SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-21, "Self-Diagnosis" (with CONSULT-III) or WT-22, "Flash Code Chart" (without CONSULT-III).
ECU Diagnosis
Flash Code Chart
>> GO TO 4

4. SYMPTOM
Check for symptoms. Refer to WT-24, "Symptom Table". Symptom Table
>> GO TO 5

5. MALFUNCTIONING PARTS
Repair or replace the applicable parts.
>> GO TO 6

6. DRIVE TEST
1. Perform a drive test.
2. Check the low tire pressure warning lamp.
>> GO TO 7

7. SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-21, "Self-Diagnosis" (with CONSULT-III) or WT-22, "Flash Code Chart" (without CONSULT-III).
ECU Diagnosis
Flash Code Chart
Are any DTC's displayed?
YES >> GO TO 5.
NO >> Inspection End.