Diagnostic Procedure 6
Trouble Diagnosis without CONSULT-IIIDIAGNOSTIC PROCEDURE 6
Inspect SRS Malfunction Using AIR BAG Warning Lamp - Diagnosis Mode
NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.
1. Turn ignition switch ON.
2. After AIR BAG warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two more times (3 times total).
5. Turn ignition switch ON.
SRS is now in Diagnosis mode. Refer to "Trouble Diagnosis without CONSULT-III".