How to Read Harness Layout
HARNESSHarness Layout
HOW TO READ HARNESS LAYOUT
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
- Main Harness
- Engine Room Harness
- Engine Room Harness (Passenger Compartment)
- Engine Control Harness
- Chassis Harness and Rear Sonar Sensor Sub-harness
- Body Harness (King Cab Models)
- Body Harness (Crew Cab Models)
- Body No.2 Harness (King Cab Models)
- Body No.2 Harness (Crew Cab Models)
- Room Lamp Harness
To use the grid reference
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.