Interior - RF Seat Back Vibration At Highway Speeds: Overview
Classification: BT08-020BReference: NTB08-063B
Date: July 7, 2011
FRONT PASSENGER SEAT BACK VIBRATION AT HIGHWAY SPEEDS WHILE UNOCCUPIED
This bulletin has been amended. The APPLIED VEHICLES section has been amended. Please discard all previous versions.
APPLIED VEHICLES:
2007 - 2009 Armada (TA60)
2007 - 2009 FrontIer (D40)
2007 - 2009 Pathfinder (R51)
2007 - 2009 Titan (A60)
2007 - 2009 Xterra (N50)
APPLIED VINS:
Armada vehicles built after: 5N1AA08(**)7N 717724
Frontier vehicles built after: 1N6(*)D0(***)7C 414973
Pathfinder vehicles built after: 5N1(*)R18(**)7C 614364
Titan vehicles built after: 1N6(*)A07(**)7N 230010
Xterra vehicles built after: 5N1(*)N08(**)7C 511328
APPLIED DATES:
Armada vehicles built after: January 29, 2007
Frontier vehicles built after: October 27, 2006
Pathfinder vehicles built after: October 27, 2006
Titan vehicles built after: January 29, 2007
Xterra vehicles built after: October 27, 2006
IF YOU CONFIRM
The front passenger seat back vibrates at highway speeds while unoccupied.
ACTIONS
^ Remove the seat back board.
NOTE:
> If the vehicle is equipped with a soft seat back board, refer to Module A.
> If the vehicle is equipped with a hard seat back board, refer to Module B.
^ Apply foam tape to damper sides, then install mass (vibration) damper.
^ Cut the J-clip located on the seat back to assure free movement of the mass damper.
^ Re-assemble the vehicle.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing the repair.
PARTS INFORMATION
CLAIMS INFORMATION