Diagnostic Procedure 2

DIAGNOSTIC PROCEDURE 2
1. Connect CONSULT-III.
2. Diagnostic code is displayed on SELF-DIAG [CURRENT].
If no malfunction is detected on SELF-DIAG [CURRENT], but malfunction is detected in SRS Operation Check using the AIR BAG warning lamp, the following cases may exist:
- SELF-DIAG [PAST] memory might not be erased.
- The SRS system malfunctions intermittently.

Perform DIAGNOSTIC PROCEDURE 4. Refer to SRC-15, "Self-Diagnosis Function (Without CONSULT-III)". Self-Diagnosis Function (Without CONSULT-III)