With Intelligent Key System

U1010 CONTROL UNIT (CAN)





DTC Logic

DTC DETECTION LOGIC









Diagnosis Procedure
1.REPLACE BCM
When DTC [U1010] is detected, replace BCM.
- Replace BCM. Refer to Service and Repair.




Special Repair Requirement
1.REQUIRED WORK WHEN REPLACING BCM
The BCM must be initialized when replaced. Refer to Description for BCM configuration.
Initialize NVIS by CONSULT-III. For the details of initialization refer to CONSULT-III operation manual NATSIVIS/NVIS.
- Work end.