Cylinder Block Assembly: Specifications

CYLINDER BLOCK






PISTON, PISTON RING AND PISTON PIN

Available Piston






Piston Ring






Piston Pin






CONNECTING ROD










CRANKSHAFT











MAIN BEARING











Undersize






Main Bearing Oil Clearance






Connecting Rod Bearing






Undersize






Connecting Rod Bearing Oil Clearance






Main Bearing Cap












1. Follow the steps below to tighten each main bearing cap bolt.

a. Apply engine oil to threads and seating surfaces of bolts, and tighten all bolts temporarily.











b. Measure tightening angle using Tool.

Tool number : KV10112100 (BT-8653-A)

CAUTION: Measure tightening angle using Tool. Do not measure visually.





- Rotate crankshaft by hand after bolts are tightened. Check if it rotates smoothly.
- Check crankshaft side clearance. Refer to Inspection After Disassembly.


Crankshaft Pulley Torque