Component Function Check

BATTERY SAVER OUTPUT/POWER SUPPLY CIRCUIT


Component Function Check

1.CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION
CONSULT-III
1. Turn ignition switch ON.
2. Turn each interior room lamp ON.
- Front room/map lamp assembly
- Vanity lamps
- Personal lamp 2nd row
- Personal lamp 3rd row
- Cargo lamp
3. Open the driver door to turn ON the step lamps and puddle lamps.
- Front step lamps
- Rear step lamps
- Foot lamps (if equipped)
- Puddle lamps (if equipped)
4. Select "BATTERY SAVER" of BCM (BATTERY SAVER) active test item.
5. While operating the test item, check that each interior room lamp turns ON/OFF.





Is the inspection result normal?
YES - Battery saver output/power supply circuit is normal.
NO - Refer to Diagnosis Procedure.