Base Audio

AUDIO ANTENNA


Removal and Installation


REMOVAL
1. Remove lower glove box. Refer to Removal And Installation.
2. Disconnect audio antenna cable from antenna feeder.
3. Remove antenna rod.
4. Remove rubber seal.
5. Remove cowl top. Refer to Service and Repair.
6. Remove fender protector. Refer to Front Fender Protector.
7. Remove antenna base bolts.
8. Remove antenna base and cable.






INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Always properly tighten the antenna rod during installation or the antenna rod may bend or break during vehicle operation.