Keyless Entry Receiver: Service and Repair

REMOTE KEYLESS ENTRY RECEIVER


Removal and Installation


REMOVAL
1. Disconnect the battery negative terminal. Refer to Removal and Replacement.
2. Remove the front pillar upper finisher (RH). Refer to Body Side Trim.
3. Remove the side ventilator grille (RH). Refer to Exploded View.
4. Remove the instrument side finisher. Refer to Exploded View.
5. Remove the upper glove box. Refer to Exploded View.





6. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

INSTALLATION
Installation is in the reverse order of removal.