Component Function Check

IGNITION KEYHOLE ILLUMINATION CONTROL CIRCUIT


Component Function Check


CAUTION:
Before performing the diagnosis, check that the following is normal.
- Battery saver output/power supply circuit
- Ignition keyhole illumination bulb
1.CHECK IGNITION KEYHOLE ILLUMINATION OPERATION CONSULT-III
1. Turn the ignition switch ON.
2. Select "IGN ILLUM" of BCM (INT LAMP) active test item.
3. While operating the test item, check that the ignition keyhole illumination turns ON/OFF





Is the inspection result normal?
YES - Ignition keyhole illumination circuit is normal.
NO - Refer to "Diagnosis Procedure".