Control Unit: Service and Repair

DIFFERENTIAL LOCK CONTROL UNIT


Removal and Installation


REMOVAL
1. Disconnect the battery cable from the negative terminal.





2. Disconnect the differential lock control unit connector.
3. Remove the two bolts and remove the differential lock control unit.

INSTALLATION
Installation is in the reverse order of removal.
- When installing differential lock control unit, tighten bolts to the specified torque.

Differential lock control unit bolts : 5.1 N.m (0.52 kg-m, 45 in-lb)

- After the installation, check DIFF LOCK indicator lamp. Refer to Precaution For Servicing Rear Final Drive.