Cabin Temperature Sensor / Switch: Service and Repair

INTAKE SENSOR


Removal and Installation


REMOVAL
1. Remove the front kick plate. Refer to Removal And Installation.
2. Remove the lower dash side finisher. Refer to Exploded View.
3. Remove the front pillar lower finisher. Refer to Removal And Installation.
4. Remove the assist grip handle.
5. Remove the front pillar upper finisher. Refer to Removal And Installation.
6. Remove the lower glove box. Refer to Exploded View.
7. Remove the upper glove box (cluster lid E). Refer to Exploded View.





8. Disconnect the intake sensor electrical connector.

NOTE:
The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
9. Twist the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.

INSTALLATION
Installation is in the reverse order of removal.