Control Unit (CAN)

U1010 CONTROL UNIT (CAN)





DTC Logic

DTC DETECTION LOGIC









Diagnosis Procedure
1. REPLACE BCM
When "DTC:U1010" is detected, replace BCM.
Replace BCM. Refer to Service and Repair.




Special Repair Requirement
1. SAVING VEHICLE SPECIFICATION
Perform "READ CONFIGURATION" with CONSULT-III to save or print current vehicle specification.
GO TO 2
2. REPLACE BCM
Replace BCM. Refer to Service and Repair.
GO TO 3
3. WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual setting" with CONSULT-III to write vehicle specification. Refer to Special Repair Requirement.
GO TO 4
4. INITIALIZE BCM (NATS)
Perform BCM initialization. Refer to CONSULT-III Operation Manual.
Work End.