Interior Illumination

ILLUMINATION


Removal and Installation


ILLUMINATION CONTROL SWITCH

Removal





The illumination control switch (1) is replaced as a part of the combination meter assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

CARGO LAMP (if equipped)

Removal





1. Using a suitable tool (A), release the pawls and remove the cargo lamp lens (1).
2. Remove cargo lamp screws (2).
3. Disconnect the connector, then remove cargo lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool, release the pawls and remove the cargo lamp lens.
2. Release the cargo lamp bulb retainers (1), then pull bulb (2) straight out to remove.

Cargo lamp bulb : 12V - 8W

CONSOLE ILLUMINATION LAMP (if equipped)

Removal





The console illumination lamp (1) is replaced as part of the map lamp assembly (2). Service and Repair.
<--: Vehicle front

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove overhead console. Service and Repair.





2. Rotate console illumination lamp bulb (1) counterclockwise, then pull straight out away from map lamp assembly (2) to remove.