Removal and Installation

FRONT FENDER


Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL
1. Remove clips and remove front fender seal (front/rear).
2. Remove front grille. Removal And Installation.
3. Remove front bumper fascia. Removal And Installation.
4. Remove front combination lamp. Xenon Type (XENON TYPE), Halogen Type (HALOGEN TYPE).
5. Remove fender protector. Removal And Installation.









6. Using remover tool (A), remove front fender finisher (1).
7. Disengage front part of windshield glass molding from front fender.
8. Remove mounting bolts and remove front fender.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, peel of the urethane foam bit at a time, and carefully to remove it.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installation, check front fender adjustment. Adjustments and Adjustments.
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.