Removal And Installation

AIR CLEANER AND AIR DUCT


Removal and Installation


REMOVAL

NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1. Remove radiator core support covers (RH and LH).
2. Remove air duct (inlet).
3. Disconnect harness connector from mass air flow sensor.
4. Disconnect PCV hose.
5. Remove air cleaner cases (upper and lower) with mass air flow sensor and air duct assembly disconnecting their joints.
- Add mating marks if necessary for easier installation.
6. Remove mass air flow sensor from air cleaner case (upper), if necessary.

CAUTION:
Handle the mass air flow sensor with following cares.
- Never shock the mass air flow sensor.
- Never disassemble the mass air flow sensor.
- Never touch the sensor of the mass air flow sensor.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Align marks. Attach each joint. Screw clamps firmly.