With 7 Inch Display

DIAGNOSIS AND REPAIR WORK FLOW


Work Flow


OVERALL SEQUENCE





*1: Testing and Inspection.
*2: With 7 Inch Display.

DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
- GO TO 2.
2.VERIFY SYMPTOM
Verify the symptom with operational check based on the information obtained from the customer. Description & Inspection.
- GO TO 3.
3.CHECK WITH SELF-DIAGNOSIS FUNCTION OF CONSULT-III
Using CONSULT-III, perform "SELF-DIAGNOSIS RESULTS" of HVAC. Testing and Inspection.
Are self-diagnosis results normal?
YES - GO TO 4.
NO - GO TO 5.
4.NARROW DOWN THE MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts. With 7 Inch Display.
- GO TO 5.
5.REPAIR OR REPLACE
Repair or replace malfunctioning parts.

NOTE:
If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.
- GO TO 6.
6.FINAL CHECK
Check that the A/C system operates normally.
Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 3.