Maintenance Indicator Reset

Maintenance information

To set the maintenance interval for Reminders 1 to 4, choose an item using the multi-function controller and push the ENTER button.

You can also set to display a message to remind you that the maintenance needs to be performed.

The following example shows how to set Reminder 1. Use the same steps to set the other maintenance information.

1. Reset the driving distance to the new maintenance schedule.

2. Set the interval (mileage) of the maintenance schedule. To determine the recommended maintenance interval.

3. To display the reminder automatically when the set trip distance is reached, highlight the interval Reminder" key with the multi-function controller and push the ENTER button.

4. To return the display to MAINTENANCE INFO., push the BACK button.

Maintenance information display cannot be operated when the vehicle is moving. Stop the vehicle in a safe place to see the information. The unit can be converted between "US" and "Metric". (See "HOW TO USE SETTING BUTTON" in this article.)






The Reminder will be automatically displayed as shown when both of the following conditions are met:

- The vehicle is driven the set distance and the ignition switch is pushed to the LOCK position.

- The ignition switch is pushed to the ACC or ON position the next time you drive the vehicle after the set value has been reached.

To return to the previous display after the "MAINTENANCE NOTICE" screen is displayed, push the BACK button.

The "MAINTENANCE NOTICE" screen is displayed each time the ignition switch is pushed to the ON position until one of the following conditions is met:

- "Reset Distance" is selected.

- "Interval Reminder" is set to OFF.

- The maintenance interval is set again.






Others settings (models with navigation system)

The Others settings display will appear when pushing the SETTING button, selecting the "Others" key with the multi-function controller and pushing the ENTER button.

Select Units

Choose the "Select Units" key and push the ENTER button. Select "US" (Mile, CF, MPG) or "Metric" (km, °C L/1OO km) for your favorite display appearance.






Language/Units settings (models without navigation system)

The Language/Units settings display will appear when pushing the SETTING button, selecting the "Language/Units" key with the multi-function controller and pushing the ENTER button.

Select Units:

Choose the "Select Units" key and push the ENTER button. From the following display, select "US" (Mile, °F, MPG) or "Metric" (km, °C, L/1OO km) for your favorite display appearance.