Cruise Test

ROAD TEST

Cruise Test

1.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 1)
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.

CVT fluid operating temperature : 50 - 80�C (122 176�F)

2. Park vehicle on flat surface.
3. Move selector lever to "P" position.
4. Start engine.
5. Move selector lever to "D" position.

6. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 2.
NO - Symptom Related Diagnostic Procedures. GO TO 2.
2.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.

3. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 4.
NO - Symptom Related Diagnostic Procedures. GO TO 4.
4.CHECK OVERDRIVE OFF CONDITION (PART 2)
1. Park vehicle on flat surface.
2. Push overdrive control switch.

3. Accelerate vehicle at 8/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 5.
NO - Symptom Related Diagnostic Procedures. GO TO 5.
5.CHECK "L" POSITION FUNCTION (PART 1)
1. Park vehicle on flat surface.
2. Move selector lever to "L" position.

3. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 6.
NO - Symptom Related Diagnostic Procedures. GO TO 6.
6.CHECK "L" POSITION FUNCTION (PART 2)
1. Park vehicle on flat surface.
2. Move selector lever to "L" position.

3. Accelerate vehicle at 8/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 7.
NO - Symptom Related Diagnostic Procedures. GO TO 7.
7.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in "L" position?
YES - 1. Stop the vehicle.
2. Perform "Self Diagnostic Results" in "TRANSMISSION".
NO - Symptom Related Diagnostic Procedures. Then continue trouble diagnosis.