Inspection

TRANSAXLE ASSEMBLY


Inspection and Adjustment


INSPECTION BEFORE INSTALLATION









After inserting a torque converter to transaxle assembly, check that dimension (A) is within the reference value limit.

Dimension A : Torque Converter.


INSPECTION AFTER INSTALLATION
Check the following.
- Check for CVT fluid leakage and check CVT fluid level. Service and Repair.
- Check CVT position. Adjustments.
- Start and warm up the engine. Visually check that there is no leakage of engine coolant and CVT fluid.

ADJUSTMENT AFTER INSTALLATION
Erase TCM data.
- Erase CVT fluid degradation level data. CONSULT-III Function (Transmission).
- When replacing the transaxle assembly, erase EEP ROM in TCM. Programming and Relearning.